Energy-efficient spray foam solutions for San Anselmo, CA. Roofing, insulation, and coatings that reduce energy costs and extend roof life by decades.
Full-spectrum spray foam solutions for residential and commercial buildings in San Anselmo, CA.
Spray foam insulation for crawl space walls, rim joists, and band boards that eliminates moisture, cold floors, and musty odors. Closed-cell foam acts as both insulation and vapor barrier in a single application.
Pre-purchase, post-storm, or routine maintenance — our inspection reports give you the data you need to make informed decisions about your roof. Infrared moisture scans reveal trapped water invisible from the surface.
Our replacement process is thorough: remove existing roofing to the deck, inspect and repair substrate, apply closed-cell SPF to specified thickness, and finish with a UV-protective coating. The result is a monolithic roof system with no seams to fail.
Metal roofs leak at fasteners, seams, and panel overlaps. Our coating systems bridge and seal every one of these failure points while adding a reflective finish that reduces surface temperatures and cooling costs significantly.
Expert repair for existing SPF roofs including blistering, coating deterioration, punctures, and storm damage. We restore your foam roof to like-new condition with matching materials and factory-specified application techniques.
Large-scale commercial roof restoration using SPF and coating systems that extend roof life by 20 or more years without the cost and disruption of full replacement. Phased scheduling available to keep your business operational.
Flat roofs fail at seams, flashings, and penetrations. Our crews specialize in diagnosing and repairing these critical failure points using spray foam, liquid-applied membranes, and targeted coating systems that outlast conventional patch repairs.
Precision leak detection and permanent repair for active roof leaks. We use infrared moisture scanning and visual inspection to trace the leak to its source, then apply a lasting fix — not a band-aid — so it never comes back.
Seamless waterproofing membranes applied over existing roof surfaces to eliminate leaks and ponding water permanently. Our spray-applied systems conform to every detail and create a monolithic barrier with no seams to fail.
Attic insulation with spray foam delivers the highest R-value per inch and eliminates the air infiltration that accounts for up to 40 percent of your home energy waste. Our crews install cleanly and efficiently — in and out in one day.
High-performance silicone roof coatings that resist ponding water, UV degradation, and extreme temperatures. Unlike acrylics, silicone does not re-emulsify in standing water — making it ideal for flat roofs with drainage challenges.
Protect your roofing investment with a maintenance program designed for your specific roof type. Our crews document every visit with photos and condition ratings so you always know the exact state of your roof.
Roof restoration saves 50 to 70 percent compared to full replacement while delivering equivalent performance. Our SPF and coating systems seal every seam, add insulation value, and provide a reflective finish that cuts cooling costs.
Complete SPF roof systems for commercial and residential buildings. Our factory-trained crews apply closed-cell foam directly to your roof deck, creating a monolithic waterproof membrane that eliminates seams, joints, and the leak points they create.
When severe weather damages your roof, our storm response crews deploy fast — securing your property, documenting every impact point for your insurance claim, and restoring your roof with quality materials and expert workmanship.
Serving the growing town of San Anselmo, CA, Lapolla Industries delivers the same spray foam roofing and insulation technology trusted by commercial and industrial facilities across the nation. Our San Anselmo crews combine deep SPF expertise with local knowledge of California building codes and climate demands.
Whether you need a spray foam roof on your commercial building, silicone coating on your flat roof, or closed-cell insulation in your attic, Lapolla Industries brings the equipment, materials, and experience to do it right. Every project in San Anselmo starts with a free inspection and ends with a warranty you can count on.
Here is what sets Lapolla Industries apart from other contractors in San Anselmo.
Every project comes backed by manufacturer material warranties plus our own workmanship guarantee. We handle all warranty registration so you are always covered.
No hidden fees, no surprise charges. You receive a detailed written estimate before we start and the final invoice matches — guaranteed. Every line item explained.
SPF roofing delivers the highest R-value per inch of any commercial insulation. Our customers typically see 20 to 40 percent reductions in heating and cooling costs after installation.
Our crews live and work in the communities we serve. We understand local building codes, climate conditions, and the best SPF systems for your specific region.
Lapolla Industries has been at the forefront of spray polyurethane foam technology since 2003 — with deep roots in SPF manufacturing and application that few competitors can match.
Have questions about spray foam in San Anselmo? We have answers.
Spray foam insulation costs in San Anselmo typically range from $1.50 to $3.50 per square foot for open-cell and $3.00 to $7.00 per square foot for closed-cell. The exact price depends on the area being insulated, foam thickness, and accessibility. Most San Anselmo homeowners see a full return on investment through energy savings within 3 to 5 years.
If your commercial roof in San Anselmo is structurally sound but showing surface deterioration — cracked coatings, minor leaks, UV damage — restoration with SPF and a new coating system is likely the better investment. If there is widespread substrate damage, saturated insulation, or structural concerns, full replacement may be necessary. Our inspection will determine which option is right.
Yes. Spray foam applied to crawl space walls and rim joists creates an airtight moisture barrier that eliminates condensation, musty odors, and cold floors. For San Anselmo homes with persistent crawl space moisture issues, closed-cell foam combined with vapor barrier encapsulation provides a permanent solution.
Spray foam is one of the best solutions for flat and low-slope roofs in San Anselmo. The seamless application eliminates the seams and joints where conventional flat roof systems fail. SPF also self-levels to eliminate ponding water — one of the biggest causes of flat roof leaks and premature failure.
Yes. Every San Anselmo crew is fully licensed, bonded, and insured for spray foam roofing and insulation work. We carry general liability and workers compensation coverage on every project. You can request proof of insurance before any work begins.
Call us immediately for emergency tarping to prevent further water damage. Our San Anselmo storm damage crews respond quickly to secure your property, document all damage with photos and measurements for your insurance claim, and provide a complete restoration plan. We work directly with insurance adjusters to ensure your claim is handled smoothly.
See what our customers have to say about their experience with Lapolla Industries.
"Our old three-layer built-up roof was beyond saving. They stripped everything down to the deck, repaired the substrate, and installed a new spray foam roofing system. The building is better insulated now than it has ever been."
"Regular maintenance visits twice a year keep our flat roof in great shape. They clean drains, check seams, inspect all penetrations, and send a detailed report with photos. Good preventive program at a reasonable cost."
"Our corrugated metal roof was rusting at every fastener and seam. They cleaned the entire surface, treated the rust, and applied a thick elastomeric coating. The roof looks brand new and is completely sealed now."
Lapolla Industries proudly serves property owners in these cities near San Anselmo.